Banvel II


Improved broadleaf weed control for dicamba-tolerant soybeans and corn.

  • Controls tough broadleaf and perennial weeds.
  • Multiple modes of action with glyphosate for enhanced weed control and resistance management.

How it works


Banvel® II can be tank mixed and used in pre-plant applications or in-crop applications or other applications.


Controls broadleaf weeds in:

  • Dicamba-tolerant soybeans1
  • Corn
  • Canary grass
  • Crop-free land (summer fallow and stubble)
  • Low bush blueberries
  • Reduced tillage (prior to seeding and reduced tillage fallow)
  • Pastures and rangeland grasses
  • Red fescue
  • Seedling grasses grown for seed

1 Apply by ground ONLY to dicamba-tolerant soybeans. Soybean varieties that are not designated as dicamba-tolerant will be damaged or destroyed by this treatment.

When to apply

Crop Crop Stage
Dicamba-tolerant soybeans1 pre-plant, pre-emergence,

and/or

post-emergence to the crop once or twice up to early flower
Corn up to 50 cm tall2
Canary seed 3 to 5 leaf
Pasture grasses established, actively growing
Red fescue (new seedling) 5cm
Red fescue (established) flag-leaf
Seedling grasses 2 to 4 leaf

1 Apply by ground ONLY to dicamba-tolerant soybeans. Soybean varieties that are not designated as dicamba-tolerant will be damaged or destroyed by this treatment.

2 Broadcast spray up to 20 cm, larger corn plants require drop nozzles. Staging depends on application rate – see label for details.

How much to apply


One case of Banvel II herbicide will treat 165 to 220 acres, depending on crop.


In-crop application.10, 11

Canary seed 117 ml/ac (290 ml/ha)
Field corn 2
Dicamba-tolerant soybeans1, 12, 13, 14
243 to 505 ml/ac (0.6 to 1.25 L/ha)
Seedling grasses 93 to 117 ml/ac (230 to 289 ml/ha)
Red fescue 243 ml/ac (600 ml/ha)

Pasture, rangeland and non-crop areas10,11

For brush weed controls15 0.85 to 1.48 L/ac (2.1 to 3.66 L/ha)
For broadleaf weed control 0.85 to 1.8 L/ac (2.1 to 4.4 L/ha)

Mixing Instructions


  1. Use a 50 mesh filter screen.
  2. Fill clean tank with 1/2 of the required amount of clean water and agitate during the entire mixing procedure.
  3. Add the required amount of Banvel II herbicide.
  4. If tank mixing, add the appropriate tank-mix partner now.
  5. Add the rest of the water to the spray tank and maintain sufficient agitation during mixing and spraying to ensure a uniform spray mixture.

1 Apply by ground ONLY to dicamba-tolerant soybeans. Soybean varieties that are not designated as dicamba-tolerant will be damaged or destroyed by this treatment.

2 Broadcast spray up to 20 cm, larger corn plants require drop nozzles. Staging depends on application rate – see label for details.

10 See label for a complete list of additional available tank mixes and their rates. Tank mix options are not included in the case.

11 See label for water rate application.

12 Banvel II can be used alone or in tank mix with Roundup® WeatherMAX with Transorb® 2 Technology Liquid Herbicide for additional broadleaf and grass weed control. See label for important details on rates.

13 The 505 ml/ac rate is to be used only once in a season and should be used pre-plant, pre-emergence or in crop early post-emergence.

14 991 ml/ac of Banvel II is the maximum total to be applied in a single growing season year.

15 Must be applied in tank mix, see label for tank mix partners.

Tank Mixes


How to tank-mix Banvel II

Whether you spray early or late, Banvel II offers the widest array of tank-mixes to ensure a one-pass solution for any operation.


Pre-plant

Banvel II can be tank mixed with:

Roundup

Frontier®


Pre-emergence

Banvel II can be used alone at 0.5 L/ac or in tank-mixes with the following herbicides for additional broadleaf and grassy weed control:

Tank-mix partner Rate per acre
Dual Magnum 0.809 - 1.11 L
Dual II Magnum 0.8090 - 1.11 L
Frontier Max Herbicide 0.306 - 0.39 L
Primextra II Magnum 1.214 - 1.62 L
Aatrex Liquid 480* 0.85 L
Prowl 400** 1.7 L
Aatrex Liquid 480* + Dual II Magnum 0.85 L + 0.81 L

* Other atrazine formulations will require a rate calculation adjustment according to percent active ingredient

** Other pendimethalin formulations will require a rate calculation adjustment according to percent active ingredient.


Post-emergence

Banvel II or Banvel II tank-mixes can be applied as "overlay" to corn previously treated with any other broadleaf or grass herbicide. The 0.505 L rate of Banvel II as "overlay" is particularly effective in controlling velvetleaf and providing extended residual control of other late germinating, deep rooted annuals. Note: Unless otherwise specified, do not use additives such as oils, wetting agents, or sticking agents.


Tank-mix partner Rate per acre
Banvel II + Frontier Max Herbicide 0.505 L + 0.306 – 0.390 L
Banvel II + Aatrex Liquid 480* 0.505 L + 0.85 L
Banvel II + Aatrex Liquid 480* + Dual II Magnum 0.243 – 0.505 L + 0.93 L + 0.809 - 1.11 L
Banvel II + Primextra II Magnum 0.243 - 0.505 L + 1.21 – 1.62 L
Banvel II + Prowl 400** 0.0.243 - 0.505 L + 1.7 L
Banvel II + Ultim 75% DF + non-ionic surfactant 0.243 L + 0.404 bag + 0.2% v/v
Banvel II + Elim EP Herbicide 25% DF + non-ionic surfactant 0.243 L + 24 g + 0.2% v/v
Banvel II + Dual II Magnum 0.243 - 0.505 L + 0.809 – 1.11 L
Banvel II + Prowl 400** + Elim EP Herbicide 25% DF + non-ionic surfactant 0.253 L + 1.01 L + 20 g + 0.2% v/v

* Other atrazine formulations will require a rate calculation adjustment according to percent active ingredient


** Other pendimethalin formulations will require a rate calculation adjustment according to percent active ingredient.

*** For annuals, apply before 2-leaf stage.

Weeds controlled


Bindweed, field
Burdock (young seedlings)*
Canada fleabane3
Canada thistle (top growth only)
Canola, volunteer*
Cleavers
Cocklebur
Corn spurry
Cow cockle
Flixweed*
Kochia*
Lady's thumb
Lamb's-quarters
Mustard, hare's-ear
Mustard, Indian
Mustard, tumble
Mustard, wild
Mustard, wormseed
Radish, wild*
Ragweed, common
Ragweed, false
Ragweed, giant
Redroot pigweed*
Russian pigweed*
Shepherd's-purse*
Sow-thistle, perennial
Smartweed, green
Tartary buckwheat
Velvetleaf
Wild buckwheat


*Banvel and 2,4-D amine tank-mix

3 post emergence only

Product specifications


Size (units x size): 2 x 10 L
Product Article #: 58121781
PCP #: 23957
Ontario Classification #: 3
Gross Weight of Package: 20 kg
Units/Pallet: 36 Cs / 72 Jugs
PTS - T/L (48 foot): 20
Warehouse Stack Height: 2 pallets
Heated Storage: No
Flash Point: >94 °C
NFC Class: N/R
TDG Information: Not Regulated

Where to Buy

Postal Code:

Distance (kms):

Find